reukkes 0 #1 March 23, 2007 I recently changed the soft slider bumpers into some harder plastic ones, because they got worn by frequent slider on/off changes: the original bumpers of my Gargoyle are really elastic, and they break in no time. I'm a little worried about friction that might occur between the lines of the canopy and the hard plastic at openings, because the plastic bumpers are much stiffer and the upper border much thicker and sharper. Is line damage possible?trust but verify Share this post Link to post Share on other sites
Calvin19 0 #2 March 24, 2007 I use hard clear plastic tube, (NOT the stupid soft shite the manufacturers put on there) have about 400 jumps on it and no squaks. (I KNOW the soft tube is for kids who leave their slider on all the time.) Share this post Link to post Share on other sites
jdatc 0 #3 March 24, 2007 QuoteI use hard clear plastic tube, (NOT the stupid soft shite the manufacturers put on there) I have one of each kind (clear / soft) that came with each of my rigs from the same manufacturer...... but I haven't jumped them both near enough to see the breakdown.........One's practically a virgin! I think I'll wait and see.... and post my findings in ayear. Share this post Link to post Share on other sites
mindtrick 0 #4 March 24, 2007 i use duck tape like a real man Share this post Link to post Share on other sites
TomAiello 26 #5 March 24, 2007 QuoteI'm a little worried about friction that might occur between the lines of the canopy and the hard plastic at openings, because the plastic bumpers are much stiffer and the upper border much thicker and sharper. Is line damage possible? I've switched out the soft bumpers for hard ones on multiple rigs, both my own and my students. Mostly, I used the hard ones because that was all I could improvise at Home Depot for less than 10 bucks (I still have a virtually endless supply, if anyone wants some). The first time I did it I had the manufacturer take a look at it about a week later, and he said he didn't see any problems with it. Electrical tape has also worked pretty well for me on dedicated slider off rigs.-- Tom Aiello Tom@SnakeRiverBASE.com SnakeRiverBASE.com Share this post Link to post Share on other sites
havensiangst 0 #6 March 24, 2007 ApexBASE make really good ones...good quality and they are elastic..i think they are made of some siliconmaterial.. Share this post Link to post Share on other sites
Calvin19 0 #7 March 24, 2007 i was mistaken, my vertigo gear came with the nice clear bug hard bumpers, and i just replaced them, i thought i had done it myself, but vertigo sent the nice ones (big hard clear) bumpers with the gear. sorry about that. Share this post Link to post Share on other sites
joni 0 #8 March 24, 2007 Tom, Save a set for me as I might need them, I have the slider bumpers that came with my gear and they appear to be the soft ones. Share this post Link to post Share on other sites