alexey 6 #1 June 21, 2005 Is there some standart for that, or any manufacturer uses that they used? I checked 5 rigs in my loft - space varry for 4,6 mm to 6,5 mm. Sorry for bad EnglishLexa Quote Share this post Link to post Share on other sites
marinho 0 #2 June 21, 2005 Hi Alexey, The space between needles on binder machines on the skydiving industry is normally 3/16" inches. If you are shopping for a binder, check this web site: www.tac-tenn.com Talk with the owner, Mr Bill. They have all different kinds of binders or custom made ones. Good luck, Gus Marinho Rigging SolutionsGus Marinho Quote Share this post Link to post Share on other sites
KevinMcGuire 0 #3 June 21, 2005 3/16" for binding and 1/2" for canopy work Quote Share this post Link to post Share on other sites
nitrochute 2 #4 June 21, 2005 actually for canopies it is 1/4 "gauge Quote Share this post Link to post Share on other sites
masterrigger1 2 #5 June 22, 2005 Actually 3/16, 1/4, 1/2, 5/8, and 3/4 are all used. 1/2 and above are usually found on Tandem and Military Canopies. 3/16 and 1/4 are by far the most common. MEL Skyworks Parachute Service "The Icarus Service Center"Skyworks Parachute Service, LLC www.Skyworksparachuteservice.com Quote Share this post Link to post Share on other sites
