grue 1 #1 September 18, 2006 I've been using large Tube Stoes on my inside 2 locking stows (canopy was big for the bag, I was breaking bands every 2-3 jumps), large rubber bands single-stowed on the outside 2 locking stows, and single-stowed small bands on my lines. So, what do you use, and how's it working for you?cavete terrae. Quote Share this post Link to post Share on other sites
phoenixlpr 0 #2 September 18, 2006 I have microlines, but I've noticed excessive wear on the inner locking stows. I found the best stows can be made from 6mm wide, 1,5mm thick silicone tube. I use 120mm long tube with 5-6mm overlay and silicone glue inside the overlay. This kind of tube-stow can look really strong, but it will get softer in use. Quote Share this post Link to post Share on other sites
diablopilot 2 #3 September 18, 2006 Standard rubberbands, double stows.---------------------------------------------- You're not as good as you think you are. Seriously. Quote Share this post Link to post Share on other sites
RMURRAY 1 #4 September 18, 2006 standard rubber bands, not double stowed. same as i did for spectra and vectran. rm Quote Share this post Link to post Share on other sites
Martini 0 #5 September 19, 2006 Two large rubber bands on the inside grommets, two large rubber bands double hitched on the outside grommets, small rubber bands on the bag stows. My grommet stows are reasonably tight, my bag stows are just tight enough to hold the lines. I dislike tube stows. I use the same setup on regular microlines too. Then again my hma lines are on a canopy that fits the bag. I never double stow, I'm far too lazy for that.Sometimes you eat the bear.............. Quote Share this post Link to post Share on other sites
FeFe 0 #6 September 19, 2006 I used to be a huge fan of tube stows before my Kat got relined with HMA. I did not like the way HMA lines hold in t-stows. Now it's large rubber bands on the grommets and small on the bag. I never ever double stow anything. And yes I believe I get more consistent opening with rubber bands than with t-stows. Quote Share this post Link to post Share on other sites
yardhippie 0 #7 September 19, 2006 Used two large rubber bands on the inside locking stows, and small bands on the two outside stows and all other stows. In a ten jump day I MAYBE replaced one. I put about 500 jumps with em like that. Worked great.Goddam dirty hippies piss me off! ~GFD "What do I get for closing your rig?" ~ me "Anything you want." ~ female skydiver Mohoso Rodriguez #865 Quote Share this post Link to post Share on other sites
marinho 0 #8 September 19, 2006 Try to remember this 3 rules! 1-A stow should be 2"1/2 to 3"long 2-10 to 12lbs pull force 3-It has to break if it needs to. It doesn't matter if you use large or small rubber bands. As long you follow the rules above, you'll be fine! Cheers,Gus Marinho Quote Share this post Link to post Share on other sites
diablopilot 2 #9 September 19, 2006 QuoteTry to remember this 3 rules! 1-A stow should be 2"1/2 to 3"long 2-10 to 12lbs pull force 3-It has to break if it needs to. It doesn't matter if you use large or small rubber bands. As long you follow the rules above, you'll be fine! Cheers, Bingo.---------------------------------------------- You're not as good as you think you are. Seriously. Quote Share this post Link to post Share on other sites
bob.dino 1 #10 September 19, 2006 Quote1-A stow should be 2"1/2 to 3"long Why? I see this advice often, but if a reason has been posted I've missed it. Quote Share this post Link to post Share on other sites
marinho 0 #11 September 20, 2006 QuoteQuote1-A stow should be 2"1/2 to 3"long Why? I see this advice often, but if a reason has been posted I've missed it. http://www.performancedesigns.com/docs/hrdopn.pdf I hope this helps! Cheers,Gus Marinho Quote Share this post Link to post Share on other sites
Martini 0 #12 September 20, 2006 Quote1-A stow should be 2"1/2 to 3"long 2-10 to 12lbs pull force Says you. And lotsa other people. Who made these rules? Outside of the locking stows the only purpose of stows is to organize the lines. Base rigs and reserves use free stows pretty successfully. Says me. Quote3-It has to break if it needs to. Boy howdy.Sometimes you eat the bear.............. Quote Share this post Link to post Share on other sites
deadbug 0 #13 September 20, 2006 I have always used regular bands with double stows. Currently jump a Katana 107 with HMA and get great openings. Quote Share this post Link to post Share on other sites
genoyamamoto 0 #14 September 20, 2006 I use large black ralphie sky bands. Double stow on the bag, single stow thru the grommets. The sky bands work great with HMA, they last forever. Gotta go... plaything needs to spank me Feel the hate... Photos here Quote Share this post Link to post Share on other sites
Elisha 1 #15 September 20, 2006 QuoteI use large black ralphie sky bands. Double stow on the bag, single stow thru the grommets. The sky bands work great with HMA, they last forever. Wow. You're one of the other few. I use large on the locking stows and small on the rest (no doubling). Works for me. Quote Share this post Link to post Share on other sites
freakyrat 1 #16 September 21, 2006 I have my Katana with HMA lines in a Mirage G-4 Split-bag. I use a large rubber band for the center stow and small rubber bands from PD on the other stows. The combination works great for me. Chris Quote Share this post Link to post Share on other sites
marinho 0 #17 September 21, 2006 As you see Chris, it doesn't matter if you use large or small rubber bands! Keep it up! Cheers,Gus Marinho Quote Share this post Link to post Share on other sites