jumpnjivin 0 #1 February 6, 2007 Does any body know what size reserve you can fit into a Voodoo -V3. The Mfg web site says the reserve container is 350 cu/in. There is a PD 160 reserve in there right now. I want to go to a 176 or similar. Thanks. Oh and does anybody have any word on PD's low bulk reserves? Are they out or still in the works.... Quote Share this post Link to post Share on other sites
DSE 5 #2 February 7, 2007 PD currently says they're only up to 143 reserves. They officially announced fulfillment to dealers today at 11:30. Other sizes won't be available for a while. Quote Share this post Link to post Share on other sites
jumpnjivin 0 #3 February 7, 2007 Damn i hope my to be new Voodoo will fit a bigger reserve Quote Share this post Link to post Share on other sites
Cloudi 0 #4 February 7, 2007 Just goes to show you how much pulll I have in development...none! A 160 would have been nice... I don't even care how small they pack--I've heard from the test jumpers that they are incredible canopies! Not fair! Not fair! Kim Watch as I attempt, with no slight of hand, to apply logic and reason. Quote Share this post Link to post Share on other sites
jumpnjivin 0 #5 February 7, 2007 Do you happen to know what size reserve will fit in a Voodoo V3 container Quote Share this post Link to post Share on other sites
Cloudi 0 #6 February 7, 2007 Sure don't! I don't think they have requested any of the low bulk reserves for size testing yet, but they can certainly tell you what other reserve size will fit in your container. According to their website http://www.rigginginnovations.com/ the V3 reserve pack tray is 350 cu. in. What that means for canopy sizing is subjective, but I would "guess" it was built for a 143 if you believe in the PIA method of finding canopy pack volume. Personally, I wouldn't base any decisions on those measurements though. Give 'em a call! Kim Watch as I attempt, with no slight of hand, to apply logic and reason. Quote Share this post Link to post Share on other sites
ZigZagMarquis 9 #7 February 7, 2007 QuoteThe Mfg web site says the reserve container is 350 cu/in. There is a PD 160 reserve in there right now. I want to go to a 176 or similar. Did you ask your rigger what he or she thinks? Also, surf back to R.I's website and get their phone number and call them up... ask to speak to a rigger and/or say you have a rigging question and ask who you can talk to about it... ask them your question. I think we'd all like to hear what they say. My initial blush on going one size up on a reserve is it might be "do able", but it "depends" on several things... for instance, is the 160 tight in there now or not? The rigger packing it now would be able to tell you. But... The Mfg would be the best source of info. Quote Share this post Link to post Share on other sites
airgord 1 #8 February 8, 2007 Everyone from RI is at the PIA convention. Send an email to info@rigginginginnovations.com asking that very question, you should get an answer by early next week. We haven't had a low volume reserve to look at yet. Quote Share this post Link to post Share on other sites