wildjump 0 #1 February 25, 2009 Hey, just did my first RSL/Bungee mod on a Sigma. I used a #0 punch in the reserve flap for the grommet, but I couldn't get the UPT supplied grommet into the #0 hole. The grommet is stainless and extra long. Then I used a #1 punch and it fit nice. I think this is because of the stiffener plate. Anyone else have this problem? Quote Share this post Link to post Share on other sites
chutingstar 1 #2 February 25, 2009 QuoteHey, just did my first RSL/Bungee mod on a Sigma. I used a #0 punch in the reserve flap for the grommet, but I couldn't get the UPT supplied grommet into the #0 hole. The grommet is stainless and extra long. Then I used a #1 punch and it fit nice. I think this is because of the stiffener plate. Anyone else have this problem? I've always found using the next size up punch when going through a stiffener works better when setting a new grommet. So yes, I'm using the #1 punch on the mod as well. MikeChutingStar.com Quote Share this post Link to post Share on other sites
riggerrob 643 #3 February 25, 2009 Funny, my old #0 punch worked fine. The thing that has me confused is that UPT gave me two different types of yellow Collins lanyards. Some have hook Velcro, but the others don't. When I tried to install the modified RSL in a Sigma, I could not find any pile Velcro to mate it to???? Quote Share this post Link to post Share on other sites
