Harness Sizing

[Maki 0]

Hi, i would like to know what harness size would you recomend for a Mirage container...
Im 5,65 ft tall, wieght around 140, and have a small chest (36 inches).
Ive been told a 15,5 would do, but i have to be sure..
Thanks a lot,
Max

[kingbunky 3]

check with the mirage site regarding measuring instructions, get yourself measured, then either talk to them or a dealer to find out the appropriate size.

"Hang on a sec, the young'uns are throwin' beer cans at a golf cart."
MB4252 TDS699
killing threads since 2001

[dragon2 2]

Get yourself measured up, preferably by a rigger or another jumper who routinely does this. Follow the measuring instructions on the mirage website click

LOL beat me to it

ciel bleu,
Saskia

[likestojump 3]

are you 5ft and 6.5 inches, or did you mean something different ? If so, 15.5" to 16" sounds like a good GUESS - but for a proper answer, I would recommend talking to the manufacturer. also keep in mind having a Unisyn as opposed to a non-ringed harness will make a difference.

good luck

[chutingstar 1]

Quote

Hi, i would like to know what harness size would you recomend for a Mirage container...
Im 5,65 ft tall, wieght around 140, and have a small chest (36 inches).
Ive been told a 15,5 would do, but i have to be sure..
Thanks a lot,
Max

From Mirage's site:
http://miragesys.com/support/?loc=articles&id=12

Keep in mind this is for ringed harness Mirage containers. If it is a standard harness Mirage, you have to subtract 2 from the posted MLW number on the data label and then go back to the chart at the link above.

But really, get measured per Mirage's measuring guide and then you can use those numbers to call Mirage if you find a used rig that you think is close. You'll give Jeannie, Jen or Ward at Mirage your measurements and the SN of the rig you are looking at and they'll tell you if it will fit or not.

Mike

ChutingStar.com