Balloon jump with an Altitrack.

[scruffy 0]

So I just got my Altitrack in today. I got this altimeter because I figured it could suit any needs I had for quite some time, so please don't think I have any intention of doing a balloon jump in anything resembling the near future.

This might be silly but I was showing this thing out to a friend and he asked about seeing as the altimeter doesn't show altitude changes till it goes into "airplane" mode...what if you want to jump out of something with a much slower rate of ascent...like a balloon?

Has anyone ever done a balloon jump with an alitrack? I'm sure this is nonsense but L&B shut down their forum apparently so I figured I'd ask here.

Peace, love and hoppiness

[mchamp 1]

I've done quite a few Hop n Pops with my Altitrack and if it doesn't get enough freefall time it actually doesn't record the jump

Getting back to your original question....haven't done a balloon jump with it yet.....I'll let you know in 2 weeks though Although I'm sure you're question will be answered by then

It has however worked flawlessly doing a heli jump!

For info regarding lift ticket prices all around the world check out
http://www.jumpticketprices.com/dropzones.asp

[fcajump 164]

Naw, with that you need it to go into "balloon mode"

(The ascent rate should be fine... you'll know around 500' when it "clicks in". If you're not comfortable the first time, borrow an analog chest mount as well.)

Like the Altitrack! Love the balloon jumps!!

JW

Always remember that some clouds are harder than others...

[Arvoitus 1]

Mine worked just fine.

Your rights end where my feelings begin.

[bofh 0]

Quote

I've done quite a few Hop n Pops with my Altitrack and if it doesn't get enough freefall time it actually doesn't record the jump

Did you set it to STUdent mode? I have a little older version of the software in mine, but the only time it has failed to record the freefall (with correct settings) is when the pilot decided to do some zero-g flying.

As for balloon jumps, all of my balloon flights have been quite fast up to 100m and the Altitrack has started just fine.

[ataltitude 0]

You should be fine with the jump. When I did one it only took about 3mins to 5500 ft. Have fun, also remember get some speed up before deploying.

[scruffy 0]

Thanks for all the replies guys. I can't wait to put some jumps on this altitrack this weekend

Peace, love and hoppiness

[lowapproach 0]

I have done two balloon jumps with mine, never changing any of the settings and it worked perfectly.

[jsreznor 0]

The Altitrack does have a hop and pop mode.

Read the instruction manual.

[TheShow 0]

Mine registered balloon and helicopter jumps, but didn't register my hop and pop from 5k. I haven't really looked into why, but just for your info. :)

[ChrisL 2]

I did a helicopter jump (5300 ft) and the altitrack recorded the jump and the duration of freefall (20 sec) but it said that my min, max, and avg freefall speeds were all zero

__

My mighty steed

[Arvoitus 1]

Quote

I did a helicopter jump (5300 ft) and the altitrack recorded the jump and the duration of freefall (20 sec) but it said that my min, max, and avg freefall speeds were all zero

There needs to be certain amount of FF before those values are shown. Don't remember how much it is but it is mentioned somewhere in the manual.

I don't usually check those values unless I know I've gotten over 30 secs of FF.

Your rights end where my feelings begin.

[justme12001 0]

I have gotten some erroneous readings while doing true hop and pops(not 5500 feet and 10 sec). Have left at 3000 and deployed right away, maybe 2 sec, and have gotten things like 90 feet for exit and 50 feet for deployment. I have gotten things like this several times. I think its kinda funny and tell everybody they are my BASE jumps

[Arvoitus 1]

That hasn't happend to me and I've done some few secs to pull hop'n'pops from between 2500 and 3500 feet. I don't know if it affects anything but I've always kept it on recording both FF and under canopy.

Your rights end where my feelings begin.

[hackish 8]

If the balloon ascends too slowly then the altitrack might not think you're in an aircraft. Mine worked fine on the balloon jump I just did.

-Michael

[drjump 0]

Why jump something so complicated?

[roostnureye 2]

neptune2 works on balloons

Flock University FWC / ZFlock
B.A.S.E. 1580
Aussie BASE 121

[bofh 0]

Quote

Why jump something so complicated?

Because for me it doesn't need to be calibrated before every jump and it logs the jumps. I also like the fact that it can't be recalibrated when bumping into someone. By flipping it over, one will also see the altitude down to 10m interval which is pretty handy when landing (but that stopped working when I started to jump a small enough canopy and the wind speed pulled it straight out).

Its also quite nice to see the min, max and average FF speeds as well as FF-time and deployment altitude with a simple turning of the altimeter, compared to taking the dytter out of the helmet.

When I used to jump with two helmets, I often forgot to move one of the dytters between the helmets, but the altimeter was always with me, so no missed jumps in its log.

The only drawback is that one has to change batteries now and then.