0
GrumpySmurf

The 30 inch razor blade arrived! YAY!

Recommended Posts

After a rather long wait, my 'baby' showed up today - mounted in a shirasaya (storage scabbard) with a rudimentary polish. Sadly my digicam doesn't have the zoom needed to display the temper line (hamon) nor the grain pattern of the folded steel (hada).

On the downside, some of the fittings that were supposed to on thier way from Japan were sent to the wrong country (???) and sadly, the craftsman who made them, passed away earlier this month.

razorblade.JPG

Share this post


Link to post
Share on other sites

Then I'd go from being involved and owning a long razor blade, to simply owning a long razor blade ;)

This beauty is destined for tameshigiri (thus why no bo-hi 'groove' along the blade) - unfortunately they don't allow the testing of the blades on the bodies of executed criminals anymore :P

Share this post


Link to post
Share on other sites
If made in Japan and shipped here is it sharpened? I thought they were not allowed to make one sharp. What is the cost on this bad boy? Name it yet?

I have a WW2 officers blade, mass produced unfortunately....not a family blade. Still a nice peice of history.

JJ
JJ

"Call me Darth Balls"

Share this post


Link to post
Share on other sites
I must admit, I'm a bit of a Nihonto nut. I'm jealous as hell.

Who made it?

But I have to ask, if you were looking to buy a tameshigiri sword why didn't you look into a Howard Clark Bainite?

The Japanese make some outstanding swords that few can even come close to reproducing (I know, I've tried) but they are seriously limited in the materials they can use.

Share this post


Link to post
Share on other sites
Quote

Those are neat-o. How much does one of these toys cost you computer programmers???



I paid like $100 for the Samurai sword 5 or so years ago, and like $139 last year for the Light saber, I pre-ordered :)
__________________________________________
Blue Skies and May the Force be with you.

Share this post


Link to post
Share on other sites
Quote

Quote

As a side note - those light sabers seem really un-ergonomic, dontcha think?



Tell me about it. :P


Does it make all those cool light saber sounds?
B|
It's your life, live it!
Karma
RB#684 "Corcho", ASK#60, Muff#3520, NCB#398, NHDZ#4, C-33989, DG#1

Share this post


Link to post
Share on other sites
Quote

Quote

I paid like $100 for the Samurai sword 5 or so years ago,



just cause i'm picky about such things..thats not a sword thats a wall decoration, if its not tempered steel it doesnt really count as more than a prop..cool to look at but completely useless other wise..
____________________________________
Those who fail to learn from the past are simply Doomed.

Share this post


Link to post
Share on other sites
Quote

Quote

Quote

I paid like $100 for the Samurai sword 5 or so years ago,



just cause i'm picky about such things..thats not a sword thats a wall decoration, if its not tempered steel it doesnt really count as more than a prop..cool to look at but completely useless other wise..



Actually, IT'S THE REAL THING, not a prop.
__________________________________________
Blue Skies and May the Force be with you.

Share this post


Link to post
Share on other sites
Quote

Quote

Quote

Quote

I paid like $100 for the Samurai sword 5 or so years ago,



just cause i'm picky about such things..thats not a sword thats a wall decoration, if its not tempered steel it doesnt really count as more than a prop..cool to look at but completely useless other wise..


Actually, IT'S THE REAL THING, not a prop.



The light saber or the sword?;)
"It's just skydiving..additional drama is not required"
Some people dream about flying, I live my dream
SKYMONKEY PUBLISHING

Share this post


Link to post
Share on other sites
for 100$ not very likely..or you absolutely raped someone...quality tempered steel usually starts at around 5000 for a new blade....if your sure and your brave you should be able to slap it across the edge of a table and it will flex back..of course if its not it will snap in two.. quite a number of sword dealers have claimed there wares were real until i asked them to demostrate. at which point they began to make excuses...
____________________________________
Those who fail to learn from the past are simply Doomed.

Share this post


Link to post
Share on other sites
Quote

for 100$ not very likely..or you absolutely raped someone...quality tempered steel usually starts at around 5000 for a new blade....if your sure and your brave you should be able to slap it across the edge of a table and it will flex back..of course if its not it will snap in two.. quite a number of sword dealers have claimed there wares were real until i asked them to demostrate. at which point they began to make excuses...



Well, I've 'killed' a couple of pineapples and watermelons, but, I'm not going any further, hey, how about a match? whoever loses a limb pays for beer. :P
__________________________________________
Blue Skies and May the Force be with you.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0