ellinas 0 #1 November 6, 2012 Hello people, i currently own an Icon container and i am looking into changing the risers with longer ones. I browsed through Aerodynes website and did find longer risers available for the miniforce three ring system. The thing is that i would like to have bigger dive loops than the ones that came with the container when i purchased it. At the moment i can only fit 3 fingers inside and i suppose the longer ones that are sold from Aerodyne would have the same dive loops. does anyone know if i could fit other risers on the container? I have seen some risers on Vectors with really big dive loops. i have already sent an email to Aerodyne and while waiting for their answer i just wanted to get more opinions. blue skies Quote Share this post Link to post Share on other sites
EmuuuH 0 #2 November 6, 2012 You can put all miniring risers on your aerodyne rig. Upt sells risers with louie loups, they are quite big. But I recommend not to put more then 3 fingers in your diveloops. Because you also need fingers to hold your toggles.. Quote Share this post Link to post Share on other sites
CarpeDiem3 0 #3 November 6, 2012 Have you thought about how longer risers might affect the canopy performance? It's not necessarily going to be the same as before... Quote Share this post Link to post Share on other sites
ellinas 0 #4 November 8, 2012 QuoteYou can put all miniring risers on your aerodyne rig. Upt sells risers with louie loups, they are quite big. But I recommend not to put more then 3 fingers in your diveloops. Because you also need fingers to hold your toggles.. thanks for your reply! i've seen the UPT ones and i have to say that i like them. my concern is not that i need to put all my fingers in the loop but the fact that the loops i have now are very small and the material is soft. this is causing problems when i need to put my fingers to initiate a front riser turn. Quote Share this post Link to post Share on other sites
ellinas 0 #5 November 8, 2012 QuoteHave you thought about how longer risers might affect the canopy performance? It's not necessarily going to be the same as before... thanks for your input! yes i am fully aware that the behavior of the canopy will change. i've done a couple of canopy courses (two with flight-1) and i am really into canopy piloting with the desire to slowly start swooping. Quote Share this post Link to post Share on other sites
ellinas 0 #6 November 8, 2012 by the way i still have no official answer from aerodyne. Quote Share this post Link to post Share on other sites
hookitt 1 #7 November 8, 2012 Quote by the way i still have no official answer from aerodyne. Don't wait. Get the risers you want rather than using aerodyne.My grammar sometimes resembles that of magnetic refrigerator poetry... Ghetto Quote Share this post Link to post Share on other sites
