Traumgeliebter 0 #1 February 4, 2013 Mystery Parachute F111, Dacron lines. Measures about 230. No label. Appears professionally sewn. Anyone want to take credit for the nice work? See pictures. Thanks. Jeana Quote Share this post Link to post Share on other sites
riggerrob 643 #2 February 4, 2013 Judging by the keels - aft of the B lines - my guess is a prototype built by John Eiff circa 1980. ... predecessor to Eiff's Challenger Classic series of accuracy canopies and PD's current-production ZERO. Quote Share this post Link to post Share on other sites
JerryBaumchen 1,373 #3 February 5, 2013 Hi Rob, And that the suspension ribs extend forward of the bottom surface. Also looks like a color pattern for the folks at the USMA at West Point. JerryBaumchen Quote Share this post Link to post Share on other sites
councilman24 37 #4 February 5, 2013 Check the ribs near the nose for a printed label. Some canopies were labeled in that area. IIRC it was near the center.I'm old for my age. Terry Urban D-8631 FAA DPRE Quote Share this post Link to post Share on other sites
Traumgeliebter 0 #5 February 5, 2013 Thanks, but Mr. Eiff says it's not his. Quote Share this post Link to post Share on other sites
Traumgeliebter 0 #6 February 5, 2013 I've been over the canopy inside and out, with a magnifying glass. No label. :( Thanks Quote Share this post Link to post Share on other sites
captain1976 0 #7 February 6, 2013 Looks like a canopy made by Jim Lowe when he worked for Paragear back in the early to mid 70's.You live more in the few minutes of skydiving than many people live in their lifetime Quote Share this post Link to post Share on other sites
JerryBaumchen 1,373 #8 February 6, 2013 Hi captain, QuoteLooks like a canopy made by Jim Lowe when he worked for Paragear back in the early to mid 70's. I doubt it. I do not know about every Para-Foil that Jim & Gary Lewis built after hours at Para-Gear, but to the best of my knowledge, all of those canopies were either white/blue or red/white/blue. But, then again, they may have made something that I am not aware of. JerryBaumchen PS) Just to ad: All of the Para-Foils that Jim & Gary built had the 'A' lines going to the front riser & the "B' and 'C' and 'D' lines all were cascaded and went to the rear riser. Quote Share this post Link to post Share on other sites
darkwing 5 #9 February 7, 2013 Do you have any history (location or time) information? I was building canopies from about 1977 until about 1981. Close ups of the seams would tell me if it was my work or not. -- Jeff My Skydiving History Quote Share this post Link to post Share on other sites
captain1976 0 #10 February 7, 2013 QuoteHi captain, QuoteLooks like a canopy made by Jim Lowe when he worked for Paragear back in the early to mid 70's. I doubt it. I do not know about every Para-Foil that Jim & Gary Lewis built after hours at Para-Gear, but to the best of my knowledge, all of those canopies were either white/blue or red/white/blue. But, then again, they may have made something that I am not aware of. JerryBaumchen PS) Just to ad: All of the Para-Foils that Jim & Gary built had the 'A' lines going to the front riser & the "B' and 'C' and 'D' lines all were cascaded and went to the rear riser. Jerry, I don't remember anything about what he made with others including Gary but the one he jumped and told me "he" made was the same color in the photos here.You live more in the few minutes of skydiving than many people live in their lifetime Quote Share this post Link to post Share on other sites
JerryBaumchen 1,373 #11 February 7, 2013 Hi captain, If we could see the lines then we would know a lot more. JerryBaumchen PS) I have been wrong before & will be wrong in the future. Quote Share this post Link to post Share on other sites
racerman 0 #12 February 7, 2013 It's a Slipstream!? Check if the flares overlap on the ribs they're sewn to. Quote Share this post Link to post Share on other sites