bbrodes 0 #26 March 14, 2015 Completely forgot about this thread. I finally came up with a design I like on paper and I am going to rig everything up to my helmet when it's done and test the hell out of it. I am having it 3d printed and it should be done by the end of next week. Then I have to rig my own cable system up. If anyone is still interested in this I will be posting pictures of the system on my helmet when it is done. Should be no longer than 2 weeks from now. Quote Share this post Link to post Share on other sites
JWest 0 #27 March 14, 2015 bbrodes Completely forgot about this thread. I finally came up with a design I like on paper and I am going to rig everything up to my helmet when it's done and test the hell out of it. I am having it 3d printed and it should be done by the end of next week. Then I have to rig my own cable system up. If anyone is still interested in this I will be posting pictures of the system on my helmet when it is done. Should be no longer than 2 weeks from now. If you wouldn't mine, could you PM me your design. Not sure of your profession but my engineering brain is interested in looking at it. Quote Share this post Link to post Share on other sites
bbrodes 0 #28 March 14, 2015 I'm an A&P mechanic so I know a little engineering, not much! I'll send it over when I'm done. There are already a few problems I know of but I want to put everything together and check it out Quote Share this post Link to post Share on other sites
bbrodes 0 #29 March 20, 2015 Well I scrapped the idea. I never set it up because it would require epoxying a cable housing and a mount to my helmet which would not allow me to resell it. I am going to sell both my helmets and get the bonehead aero with a built in cutaway. That is really the best option if you want to safely fly a gorpo on a full face. This would have worked but looked like shit and it's just too over complicated. Quote Share this post Link to post Share on other sites
