Deimian 43 #1 December 11, 2014 I've made a custom setup for my G3 and my AZ1VR. I though somebody could be interested, even though it looks like I am the only one concerned by most camera mounts on FF helmets. It includes cutaway (I know it is not very effective on FF helmets, but getting rid of the strap helps to remove the helmet), and a snag-resistant homemade mount. I thought somebody here might find it interesting. The mount was made with polycaprolactone. The cutaway handle is the one from the skyshot evo. Let me know what you think. http://imgur.com/a/Y10Jj Quote Share this post Link to post Share on other sites
TommyBotten 0 #2 December 11, 2014 It's a bit hard to tell from the pictures, but just make sure the bolt on which you've mounted the camera does not stick too far out. If you should ever really need your helmet, you don't want it to have a protruding screw or bolt that could fracture your skull. Quote Share this post Link to post Share on other sites
Deimian 43 #3 December 12, 2014 The screw protrudes about 4mm. I didn't pay too much attention to it, since a hit hard enough to cause me problems with the screw will cause me problems anyway. But I agree that minimizing the risk is a good idea. It is easy to create a filling with the polycaprolactone, and I think I'll do it, so the screw doesn't protrude anymore and the hit will be distributed in a larger surface. Thanks for the feedback! Quote Share this post Link to post Share on other sites
