Precision 365 Tandem line trim

[dacota46 0]

Hello

Can anyone help me with the Precision 365 Tandem line trim chart? Their web site is down. I need to know the slack measurement on the stabilizers when relining the canopy.

Thanks

[riggerrob 643]

Just measure the slack on the old lines ...... before you cut them off. Something like 2 inches slack on B lines, 3 on C and 5 on D. It is not rocket surgery as long as you keep things symmetrical.

Overall line trims on Precision 365 and Icarus 365 are the same. I have even sewn Icarus line kits onto Precision canopies and they fly great!

[dacota46 0]

Thanks for the answer. Just wanted to make sure.

Now that you brought that up isn't the trim on the Icarus a bit different then on the Precision? You mentioned you used Icarus lines on a Precision canopy.

[Deyan 36]

riggerrob

Something like 2 inches slack on B lines, 3 on C and 5 on D.

Are you sure those are not in centimeters? Never seen a canopy with 5 inches slack!

"My belief is that once the doctor whacks you on the butt, all guarantees are off" Jerry Baumchen

[dacota46 0]

Sigma Tandem is 1 inch on the B and 1.5 inches on the C. The Icarus is a bit bulkier.

[dacota46 0]

I just found an Icarus 365 line trim chart. It says:

On the B line 1 cm.
On the C line 2.5 cm.
On the D line 3.5 cm.

[masterrigger1 2]

Quote

Just measure the slack on the old lines ...... before you cut them off. Something like 2 inches slack on B lines, 3 on C and 5 on D. It is not rocket surgery as long as you keep things symmetrical.

ROB,
WTF!

The slider would be all screwed with those measurements.It would be standing on its nose and not offering the same resistance as if it where laying flat where it was supposed to be.

Jesus....

MEL

Skyworks Parachute Service, LLC
www.Skyworksparachuteservice.com

[riggerrob 643]

master rigger,
Did you notice that I started that sentence with "Something like ........"

[masterrigger1 2]

Quote

master rigger,
Did you notice that I started that sentence with "Something like ........"

Rob,
Yes sir I did. But I also noted that your "something like..." was actually "nothing like...." the correct measurement.

Seriously Rob, you should never just throw out misinformation like that.
You are smarter than that.

MEL

Skyworks Parachute Service, LLC
www.Skyworksparachuteservice.com

[PeteS 0]

Aw c'mon Mel! Rob is from Canadia, he got confused with inches, centimeters, ect. Although he should have picked that one out before hitting "enter"...