Thysgrove 0 #1 Posted April 5, 2019 Hi All, I have a Viso 2 that was working perfect.. After change the batteries it doesn’t want to go on. I reset it and then it goes on and off immediately. 57616956822__D1F63BA1-1619-4B3B-B90E-AEB652722561.MOV Quote Share this post Link to post Share on other sites
0 IJskonijn 45 #2 April 11, 2019 My suggestions: 1. Check that it has the correct batteries, and that they are installed with the correct polarity. VISO II needs CR-2325 batteries. 2. Check with new-new batteries. Maybe your 'new' set of batteries have been laying around for too long, and lost too much juice to power up the altimeter. 3. If the problem is still there, I suggest you contact L&B directly, especially if your altimeter is still within warranty. Quote Share this post Link to post Share on other sites
Hi All,
I have a Viso 2 that was working perfect.. After change the batteries it doesn’t want to go on. I reset it and then it goes on and off immediately.
Share this post
Link to post
Share on other sites