Insta360 one r mount

[tabouare 25]

Disclaimer: I'm still waiting for confirmation that it fits on more than 2 Insta360 one r

I'm dropping this here in case people would like to fabricate them.
3D printing process = HP PA 12 (MJF)
www.hubs.com

Screws:
2x Button head #10-24 x 1/2
3x Nut #10-24 (add 1 more for extension)
1x Button head #10-24 x 3
1x Button head #10-24 x 1 (extension only)
3x Washer #10 (add 1 more for extension)

Mount helmet G3.stl Mount helmet Kiss.stl Mount camera - Long2.5.stl Mount camera.stl

[briseyda21 1]

I love dropping this here in case people would like to fabricate them

[tabouare 25]

16 hours ago, briseyda21 said:

I love dropping this here in case people would like to fabricate them

haha I didn't want to start a business around a mount and I would rather give the design to prevent an accident.  The 2 small pieces are 10$USD each and the extension is 50$USD. The more you order the cheaper it is. 

You should see the unicorn mounts people are using with this camera, it's not even funny how snag hazard they are.

I have a friend who lost a gopro on a jump using the standard gopro mount and to prevent it from happening again he used epoxy to glue a new one on his helmet because losing his gopro is worse than a reserve line stuck in it...

For those wondering, I tried on many occasions to make him understand that his mount was problematic but to no avail.

[tabouare 25]

I tested it on different Insta360 and they all work
Mods, can you remove the disclaimer in my original post?

[Nick-crow 1]

Looks great I don't suppose you could do one for the new RS. The case is changed

[Vilhov 0]

Would it be possible get these STLs?

[tabouare 25]

latest versions are here STL and native files
https://drive.google.com/drive/folders/1QB-VRBxb-5-e15NNgmdnDRMCcuY72zDb?usp=share_link