I use a piece of prefabed screen that fits into my bracket, no freefall or canopy slag...costs about fifty cents.
picture?
I'll post a couple when I get back home, I'm outta state this week...
Basically it's a 'star' shaped piece of steel screen material, bend the points of the start around the base of the smoke and secure with the rear retaining clamp, you leave an inch or so between the exhaust hole and the screen face to catch the slag & ash.
The older M-18s throw more hot stuff out than the newer ones...the most junk comes out right after pulling the pin, the sparks etc from the fuse.
~ If you choke a Smurf, what color does it turn? ~
You can post now and register later.
If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.
picture?
I'll post a couple when I get back home, I'm outta state this week...
Basically it's a 'star' shaped piece of steel screen material, bend the points of the start around the base of the smoke and secure with the rear retaining clamp, you leave an inch or so between the exhaust hole and the screen face to catch the slag & ash.
The older M-18s throw more hot stuff out than the newer ones...the most junk comes out right after pulling the pin, the sparks etc from the fuse.
~ If you choke a Smurf, what color does it turn? ~