RyanofOZ 0 #1 March 10, 2004 Just thought I would see what you all set your audible altimeto go off at as far as altitude and why. I have heard several people at my DZ explain why they have theres set they way they do so I figured I would see where everyone else fits inOz Quote Share this post Link to post Share on other sites
slotperfect 7 #2 March 10, 2004 Check out THIS THREAD My settings remain the same as I posted there: QuoteBack when I was jumping an original Dytter (one tone), I would set it for 500 feet above breakoff altitude, to let me know it was coming. Now I do mostly tandems and AFF, and jump a Pro Dytter. I set the tones as follows: First Tone: 6000 FT -500 feet above wave-off for early AFF students -500 feet above wave-off for tandems Second tone: 4500 FT -if my AFF student has not pulled by now, it's about time to assist -minimum pull altitude for tandems Third tone: 3500 feet -AFF student hard deck -500 feet above emergency procedures altitude for tandems These altitudes seem to fit into my RW jumps as well. I just mentally factor the tones into the dirtdive so I will know what they will indicate. Arrive Safely John Quote Share this post Link to post Share on other sites
RyanofOZ 0 #3 March 10, 2004 Thanks for the link. I was searching the wrong string. That helps a lot!Oz Quote Share this post Link to post Share on other sites
ThighMan 5 #4 March 10, 2004 My normal settings are: 4000 break off, 3200 deployment (long snivel), 1500 screamer. Of course the break off changes with the size of the formation.Airborne Blue Skies, No Wind Feet and Knees Together Quote Share this post Link to post Share on other sites
yoink 321 #5 March 10, 2004 5k... Start paying attention 3k... Deploy 1.5k... Pull Something What I'm doing and with how many dictates breakoff... I'll use my wrist alti for that - the 5k warning is just a heads up. Quote Share this post Link to post Share on other sites
jas8472 0 #6 March 10, 2004 1. 4000 (break off) 2. 3500 (stop tracking) 3. 1500 (do somthing) Quote Share this post Link to post Share on other sites
eWave 0 #7 March 10, 2004 1. 4500ft (breakoff on freefly jumps) 2. 3000ft (pull) 3. 2000ft (pull pull!) Quote Share this post Link to post Share on other sites
Chapsta 0 #8 March 10, 2004 5500 so I've got a heads up on figuring out where everybody is before burning out of there 3500 for quit tracking and get ready to pull 2000 for just about time to MAKE SOMETHING HAPPEN I pretty much freefly all the time and I used to set my dytter for the exact time of breakoff, but now I enjoy hearing my audible early so I can begin to shape the end of the dive the way I want.Carpe diem Quote Share this post Link to post Share on other sites
koz2000 1 #9 March 10, 2004 Depends on the jump. For normal FF (less than 5 way) 4500 break-off 3500 deploy 1500 do something stupid For larger FF formations it may be as high as 6000 for staging break-offs. If you're out last I'll bump up the 4500 -> 5000 the 3500 -> 4000. So you have a chance to get back to the DZ______________________________________________ - Does this small canopy make my balls look big? - J. Hayes - Quote Share this post Link to post Share on other sites
rehmwa 2 #10 March 10, 2004 RW - 3500, 2500, 1500 FF - 4500, 3000, 1500 coaching - 4500, 2500, 1500 ... Driving is a one dimensional activity - a monkey can do it - being proud of your driving abilities is like being proud of being able to put on pants Quote Share this post Link to post Share on other sites
daveb 1 #11 March 10, 2004 All belly RW stuff: 4000 - the skydive is over (finish the point!) and leave 2800 - time to deploy 1700 - pull NOW / fix what's broke NOW I have the second and last set a bit higher than my actual hard deck to allow for reaction time between the tone and my doing something about it. I use these same settings in big ways, even if the break off altitude is higher. For instance, in a recent big way, my breakoff altitude was 7500', and pull altitude at 2500'; the 4000' first warning occurred during my extended track, telling me to make any final course corrections now, and the final two remaining as before. I rarely change the first warning altitude, and never the second or third. I wear a wrist-mount visual for out-of-profile skydives, because my internal clock is not set properly. And all this is a backup for my vision and common sense (gee, the horizon is getting high....) Quote Share this post Link to post Share on other sites
SullyFlyer 0 #12 March 10, 2004 4500 (break off) 3500 (pull) 2000 (what the fuck, why haven't you pulled yet, your fucking Cypress is going to go off in like 5 seconds dude.) I've only heard the flat-line once and that was after I'd already pulled. ~ Fear is the thief of dreams... Quote Share this post Link to post Share on other sites
masher 1 #13 March 11, 2004 For "normal" (RW) jumps They're set 500' below where I want to do stuff. 3500 (why haven't you broken off yet?) 2500 (why haven't you pulled yet?) 1500 (what the fuck are you doing??!!!)-- Arching is overrated - Marlies Quote Share this post Link to post Share on other sites
dubbayab 0 #14 March 11, 2004 1st. warning 5,500 freefly breakoff 2nd. warning 3500 why haven't you pulled yet? 3rd. warning 1,500 stop fighting your main and dump your reserve in to the trash. ( high speed mal, you will be at 1,000 by the time you brain processes the 1500 ft warning tone! I think it is important to mention I hardly ever hear my second or most importantly third warning! As I have made over 400 jumps with the same settings I have become accustom to the tones, and what they represent to me in dealing with different situations. Quote Share this post Link to post Share on other sites Join the conversation You can post now and register later. If you have an account, sign in now to post with your account. Note: Your post will require moderator approval before it will be visible. Reply to this topic... × Pasted as rich text. Paste as plain text instead Only 75 emoji are allowed. × Your link has been automatically embedded. Display as a link instead × Your previous content has been restored. Clear editor × You cannot paste images directly. Upload or insert images from URL. Insert image from URL × Desktop Tablet Phone Submit Reply 0