mbs66 0 #1 January 27, 2004 I am making my own "L" mount for my pc105 on to my mindwarp. just wondering if anyone has a diagram of measuremnts i can take to the metal people. I made a cardboard version but i dont know if it is the proper fit... hard to tell with cardboard if all the holes and measurements are right cheers! Quote Share this post Link to post Share on other sites
diablopilot 2 #2 January 27, 2004 The "L" bracket from Bonehead has had all the work done for you. If you're going to make a custom one, you might as well take the measurements yourself from the camera and helmet, so you can make it truly "custom"---------------------------------------------- You're not as good as you think you are. Seriously. Quote Share this post Link to post Share on other sites
mbs66 0 #3 January 27, 2004 I guess its more of a money thing rather than a custom thing. If i order one, by the time it is shipped to canada and i pay duty and all that i am looking at 80 bucks US! i called a metal shop here and they said they could make one for about 20 bucks US... so i am taking the cheaper way Quote Share this post Link to post Share on other sites
koz2000 1 #4 January 28, 2004 Contact www.arrowdynamicsinc.com they make a pretty cheap L-bracket for $29 and it would be done right. Also it would already have the fastex and padding.______________________________________________ - Does this small canopy make my balls look big? - J. Hayes - Quote Share this post Link to post Share on other sites
mbs66 0 #5 January 28, 2004 I really just want to make my own... when you order you have to pay shipping and to get it to canada is brutally expensive sometimes. i can buy some alluminum for 5 bucks i am just looking to get the right dimensions for a pc105... like where to drill the holes... i have measured it myself... i just wanted to compare it to someones who has a similar setup to make sure i got it right... thanks for the replies though Quote Share this post Link to post Share on other sites
indyz 1 #6 January 28, 2004 Here's what I got by measuring my Arrow Dynamics C Bracket. You can always add more padding if the hole is too far outside, or elongate it a little if it is too close. Quote Share this post Link to post Share on other sites
