0
lister55

Problem sighting in video

Recommended Posts

I just recently swapped from my my "home made" camera helmet to the 2k composites FF2. I am using a cross ring sight and on the ground the video, still and sight all match perfectly. However when I get in the air, I am still looking through the center of the sight, but the images are always offset to the top right. I never had this problem untill I switched helmets. I have also heard some rumors that others have been having the same issue. Does any one know of this or have any advice?

Share this post


Link to post
Share on other sites
I have done exactly as your document recomends. But no matter if I set up at a short or long distance it just seems to be incorrect in the air. I know the sight should account for shifting of the helmet, so I can not figure this one out. i have had several other video guys try to help me sight this in properly, but it makes no difference. Starting to get frustrated as I cant figure this one out.

Share this post


Link to post
Share on other sites
Have you tried just not using a sight at all? It seems as though you're not looking through the site properly. I use a dot on my glasses and have great luck, and it's easier for me to line up the dot.
Many freefliers don't use sights unless it's competetion or important jumps.


Just a suggestion
______________________________________________
- Does this small canopy make my balls look big? - J. Hayes -

Share this post


Link to post
Share on other sites
To answer all of the questions quickly... Yes I am sure I am not bumping it. Yes I have the sight on my dominate eye. And no I havent trried without the sight. Going without is not my problem. I used the same sight on my previous helmet with no problem for ~200 jumps. This is why I dont understand what is going on. Any insight on this problem is welcome.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0