Quick, what size are the nylon screws for the Finley articulating ringsite base?

[Deuce 1]

That detail isn't on his site, and I need to replace two of my screws.

Thanks!

[diablopilot 2]

They are not 84/11ths.

Don't ask me how I know this. I just do......

----------------------------------------------
You're not as good as you think you are. Seriously.

[Deuce 1]

Dude, I didn't think the doctor was fixing you up with meds until tomorrow.

[turtlespeed 221]

Arrrgh - Darn it -

I looked this up 3 months ago - why didn't you ask me then?

Best (guess) from memory - 12/20 or 12/24

Sorry -

I'm not usually into the whole 3-way thing, but you got me a little excited with that. - Skymama
BTR #1 / OTB^5 Official #2 / Hellfish #408 / VSCR #108/Tortuga/Orfun

[NoPush 0]

They are 8-32 nylon machice screws.

Any 8-32 machine screw will work (i.e. stainless, nickel, etc.

[174fps 1]

I have the mounting instructions in front of me now.
they are 6/32 nylon machine screws

Andrew

[pyke 0]

I bought the 6/32 the other day...and I strongly recommend cutting them to the length needed before you screw them in...

AND

screwing them into the hardware away from the helmet...


I had the damnest time trying to get them in "raw"!!

Now, they just slip in!!

Kahurangi e Mahearangi,
Kiwi, RB #926, AFF-I, FAA Snr. Rigger, RN/BSN/Paramedic

[NoPush 0]

Your right, they are 6-32. Look at me I'm a dumb ass!

I'll fix my other post eh!

uuuhhh (drooling) how do fix a past post?

[turtlespeed 221]

Yeah well you were closer than me.

I'm not usually into the whole 3-way thing, but you got me a little excited with that. - Skymama
BTR #1 / OTB^5 Official #2 / Hellfish #408 / VSCR #108/Tortuga/Orfun