fixing a laser pointer

[martz 0]

Anyone knows what is the best way to fix a laser pointer on a "L" bracket.

Do you think Epoxy should be the best thing ??

Thanks a lot

===============================
Ourson # 5
impatient de sauter # 1

[AggieDave 6]

Gaffers tape or zip ties...

Or get a ring site and site it in correctly so you don't always have to double check.

--"When I die, may I be surrounded by scattered chrome and burning gasoline."

[martz 0]

I have a ring site, so the laser pointer is to adjust it a the last minute if needed.

You think gaffer tape will be solid enough and the laser pointer won't move ...

===============================
Ourson # 5
impatient de sauter # 1

[AggieDave 6]

I've seen it done with gaffer's tape before, it was liberally applied, though. In the couple years that he had it on his helmet, I never saw it move.

--"When I die, may I be surrounded by scattered chrome and burning gasoline."

[martz 0]

Ok thanks I'll try it. :)

===============================
Ourson # 5
impatient de sauter # 1

[hoym 0]

The laser pointer is great!
I used one that was designed for a gun sight.

Two screws mount it flat to the surface and it shines parallel to the cameras and eye sight.

[wlie 0]

I made my mount from an old cabinet hinge - just Dremeled off part of the arm, cut a slot for the zip tie to pass through, epoxied a nut on the inside and a screw to hold it in place.

My other ride is the relative wind.