Post your Camera Helmet .....

[pepper01 0]

2K composites Kryten helmet
Drift HD
Olympus E-PM1
Exit Equipment mouth switch
MIO 3D mounting plate ( use it for other camera work )

extremely light setup! love it!

http://www.flickr.com/photos/99497854@N03/9485771536/

[alberto_rezende 0]

Canon 600D
Sigma 10-20
Sony CX190
Raynox HD 03x conversion lens
Speed light

ALBERTO

[Jakov 0]

Rawa image
Sony cx116 + gopro

[bigorangemd 0]

That bonehead makes my neck hurt just looking at it.

[cpoxon 0]

+1

Also makes me wonder how much the 0.3x needs to be zoomed in not to see the stills lens?

Skydiving Fatalities - Cease not to learn 'til thou cease to live

[Arcticanalog 0]

Tonfly 2xplus, hero3+, canon sl1, canon 10-22mm, pro mouth switch. Yiew!

[bigorangemd 0]

Here is my completed Flat Top Pro complete with Micro Pro LED light source (advice from DSE - thanks!)

[DSE 5]

Nice!!! Looks almost the same as my own (my DSLR is vertical vs horizontal)

(decided to edit and post the most recent incarnation of my helmet).

[skyjumpenfool 2]

DSE

Nice!!! Looks almost the same as my own (my DSLR is vertical vs horizontal)

(decided to edit and post the most recent incarnation of my helmet).

Show off!!

Birdshit & Fools Productions

"Son, only two things fall from the sky."

[bigorangemd 0]

Dear God!!! Do you wear a neck brace for openings?? Thanks for the advice on the setup.

[markbdaniels 0]

Is that a helmet?

[DSE 5]

no neck brace required.
On deployment, hands on the chin keep things in place. A neckbrace would get in the way of flying.
It's not heavy, it's just torque.
Yes, a hard opening would be devastating, and this helmet setup is now done, no more jumps with it. It accomplished what it needed to accomplish. It was a great experience(s) but we're parting ways now.

[ridebmxbikes 0]

My first camera helmet i just built! Nothing fancy, just a little starter setup. Havent even flown it yet. Super excited!

Rawa
Canon rebel xti
Go-pro 3
Bite switch

[jonno 0]

Here's my offering. Custom built but probably more than I need right now in my career. I'm actually considering selling it and getting something smaller. I still think it looks wicked though.

[Scrumpot 1]

coitus non circum - Moab Stone

[JohnnyW 0]

Flat top pro with extra large top plate
2x Flatlocks
Stills: canon 7d with sigma 10-20mm
Video: NEX5N with 16mm lens / gopro 3 black
I will also mount a led light bank on the front L bracket instead of the gopro and hopefully upgrading to a 6d with 17-40mm lens soon

[Zlew 0]

JohnnyW

Flat top pro with extra large top plate
2x Flatlocks
Stills: canon 7d with sigma 10-20mm
Video: NEX5N with 16mm lens / gopro 3 black
I will also mount a led light bank on the front L bracket instead of the gopro and hopefully upgrading to a 6d with 17-40mm lens soon

Nice setup!

Have you considered grinding down the post after the clamp? Esp. since it is on your pull side.

My setup is similar, but I have the Nex3N where you have your gopro, and the gopro on top (standard plate).

[MorfiusX 0]

Getting close to finished with my setup:

* SkySytems Vapor Mid
* Brent's Concentric Ring Sight
* GoPro Hero 3+ Black w/ Cam-Do Indicator
* 2 x Flatlock
* Sony HDR-PJ540 w/ custom indicator
* Sony NEX-5N (Soon to be replaced with an A6000)

[JohnnyW 0]

Zlew

***Flat top pro with extra large top plate
2x Flatlocks
Stills: canon 7d with sigma 10-20mm
Video: NEX5N with 16mm lens / gopro 3 black
I will also mount a led light bank on the front L bracket instead of the gopro and hopefully upgrading to a 6d with 17-40mm lens soon

Nice setup!

Have you considered grinding down the post after the clamp? Esp. since it is on your pull side.

My setup is similar, but I have the Nex3N where you have your gopro, and the gopro on top (standard plate).
Cheers, yeah just haven't got around to trimming the post down yet. Will do soon

[vision 0]

Tonfly 3x
custom bracket to hold;
Rebel T2i with sigma15mm
Sony CX760
hype eye
Ringsight (removable shumacher)
and of course an ultimate switch

or Tonfly bracket to hold

canon 1000d with sigma 10-20mm
gopro

[Zlew 0]

This season's setup.

[parachutist 2]

So much empty space up there. Maybe add a solar panel recharger or something?

[roostnureye 2]

Here is my new/used helmet.
I would like to get a still setup in the future.
Sony AS100v side mounted to a cookie G3.
I fabricated the mount from aluminum and did the paintjob with Spray paint. Im really happy with how it turned out! im loving the side mount and lack of weight on top of my head!!!

Flock University FWC / ZFlock
B.A.S.E. 1580
Aussie BASE 121

[maggyrider 10]

Bonehead Optik:
- GoPro Hero 3+ Black Edition mounted with a custommade stainless steel L-Bracket for video
- Canon EOS 650D (Rebel T4i) with the EF-S 10-22mm lens mounted with X-Shut quickrelease for stills
- Larsen & Brusgaard Newton Ringsight with Schumacher quickrelease
- Conceptus tongue switch

(Paid) main application at the moment are tandem jumps...

Any ideas where to mount a flash?

Nice words are not always true - and true words are not always nice.

[cheykon 0]

I need to work on the same set up for my 2X, can you post more pictures of your custom bracket?

Cheers