jasonRose 0 #1 December 28, 2005 I know a bunch of you out there think this cam is a piece of sh-t but is is just for fun nothing serious. I am wonder what the best way to mount the external cam on my helmet. Any thoughts?? I have a bone head gunner helmet.. Some day I will have the best staff in the world!!! Quote Share this post Link to post Share on other sites
dunesurfer 0 #2 December 28, 2005 My buddy used one for a short time. He took the strap off and screwed the remote mount to the top of his Mindwarp. Quote Share this post Link to post Share on other sites
Superman32 0 #3 December 29, 2005 If you have a protec, you can conveniently strap it to the open holes on the top of it. It would alsto make it easy to route the cable through the helmet Inveniam Viam aut Faciam I'm back biatches! Quote Share this post Link to post Share on other sites
vid666 0 #4 January 1, 2006 female velcro on top of the helmet. male velcro of on the bottom of the bullet. stick it on, and cover with male velcro witch will push the bulletcam further onto the helmet. Works quite well. see pic attached. Quote Share this post Link to post Share on other sites
Ffly4phun 0 #5 February 1, 2006 I first used a small L shaped piece of metal to mount the remote camera to the side of a protec helmet. It worked great but the using the remote was horrible. It was way to much to get ready right before you went out the door. I then put the whole camcorder into one half of a small plastic clamshell that I got from a juicy juice drink box holder that my kids used when they were babies. I bolted it onto the side of my helmet and kept the camcorder in with rubber bands. This worked for 50 or so jumps and the whole 05 season. Last weekend a riser got under the corner of my mount on deployment and I lost the camcorder. It was an expensive jump. I'll replace it with a Sony MiniDV. I'm ready for a little more quality in my movies. Quote Share this post Link to post Share on other sites
