Squeak 17 #1 February 19, 2006 the tip of my Cameye LANC conector broke off and is in the LANC port is there any easy way of getting it out (no I'm not going to use a strong magnet). I've tried small pointed tweezers but they're not small enough (they are very small though)You are not now, nor will you ever be, good enough to not die in this sport (Sparky) My Life ROCKS! How's yours doing? Quote Share this post Link to post Share on other sites
stratostar 5 #2 February 19, 2006 Here's an idea for you, Go to your local high end model/hobbie shop and get you a micro drill bit set and pin vice. These are very in size but all of them are very small much smaller then any you will find at lowes you have to go to a real hobbie shop to find them not wal-mart. Once you have these you can pick your size of bit and twist the bit into the broken off part and pull it out as long as it bites into it just a little. You will have to becareful not to break the bit off inside the part cuz then you may not be able to drill it again. This is what I would do/try if I had the same issue. ~you can't pay for kids schoolin' with love of skydiving! ~ Airtwardo Quote Share this post Link to post Share on other sites
sdsouthsask 0 #3 February 19, 2006 How about a little bit of crazy glue on a pin head. Glue it to the broken off post then pull it out. Not sure if it will stick to it well enough but worth a try. Mark Quote Share this post Link to post Share on other sites
