gmikolasek 0 #1 March 17, 2008 Hi All Just recently purchased a Sony PC330 and Rawa helmet which I had hoped would be plug & play. Unfortunately, it looks like I need to remove the "handlebar" on the PC330 - the part which swivels and holds the camera strap (which I have already cut off). Question is, how do you remove this handlebar on the PC330? Anyone have any experience with this? The PC350 has a switch to just be able to remove this piece - not evident on the PC330. Any help would be appreciated. Thx! Gregg Quote Share this post Link to post Share on other sites
chrisjudice 0 #2 March 17, 2008 You need to remove the screws from the inside of the tape door behind the arm to get rid of it.. I did this about a year ago so I'm just going by memory.. Hope this helps Quote Share this post Link to post Share on other sites
verticalflyer 11 #3 March 22, 2008 Small screwdriver from inside, does the job then seal holes with gaff tape on outside soy uo dont get air, dust ingress. Cheers FraserDont just talk about it, Do it! Quote Share this post Link to post Share on other sites
