bdrake529 0 #51 September 25, 2009 Quotedoes this one work really good for you? Oh yeah... (very pleased, smug grin on my face).Brian Drake Quote Share this post Link to post Share on other sites
mccordia 74 #52 September 26, 2009 Even if it didnt work, it just gives of this bad-ass sci-fi vibe. Now where does your Ipod go? JC FlyLikeBrick I'm an Athlete? Quote Share this post Link to post Share on other sites
bdrake529 0 #53 September 27, 2009 QuoteNow where does your Ipod go? I'll let you figure it out.Brian Drake Quote Share this post Link to post Share on other sites
aerialcameraman 0 #54 October 1, 2009 Since you have your cookie box mounted on top such as I will have you had any problems with the ckosing of thr box? Has it ever come open in freefall and is the tuck tab really secure? I'm used to jumping a bonehead box and I mount the boxs on the top of my flat top pro Quote Share this post Link to post Share on other sites
Couloirman 0 #55 October 23, 2009 did you buy that rhino cam setup or build it yourself? Im trying to make myself something like that and was curious how exactly you went about it, thanks. Quote Share this post Link to post Share on other sites
Teigen 0 #56 October 28, 2009 Just got the box today! Quote Share this post Link to post Share on other sites
lilchief 1 #57 October 28, 2009 Hmm..isn't that kind of small to your 1D w/ 500mm L on? Grattis med hjelmen "Once you have tasted flight, you will forever walk the earth with your eyes turned skyward, for there you have been and there you long to return." - Da Vinci www.lilchief.no Quote Share this post Link to post Share on other sites
Teigen 0 #58 October 30, 2009 Yea! i might have to get a separate helmet for that! preferrably with a drouge on it! :P Anyways this is how i put the box on.. Does it look ok? Two screws in the front corners and one in the center at the back. Alltough the back one interfers a bit with the metal camera plate so i might have to drill a hole in the plate. As it is now it lifts the plate up just enough to make the box a bit tight to close. Quote Share this post Link to post Share on other sites
sky490 0 #59 December 23, 2009 This is the Schumacher CX-100 Box. Made from billet ABS with an aluminum hinge. The box is made so the camera slips into it with no need for bolts. It comes with everything you need including the 30 to 35 step ring. In the photo the box has the optional hood for the Century Optice .3 You can Get these at Square 2 or contact terry. terry.s@bwmail.us Quote Share this post Link to post Share on other sites
Ragnarok 0 #60 December 31, 2009 Optik Illusion (got it used three years ago) CX-100 Bonehead Goldmember Quick (sic) release. Hype Eye Pro Brent's Cross ringsite. All new liners to boot. Love this setup. Soon I will up to a flat top type helmet. But not after a hundred or so jumps on this one._________________________________________ Twin Otter N203-Echo,29 July 2006 Cessna P206 N2537X, 19 April 2008 Blue Skies Forever Quote Share this post Link to post Share on other sites
theonlyski 8 #61 January 26, 2010 I have an MXV with the side box, nothing real special, except I did do one modification which I really have never seen... I wanted to eliminate having to remove and re-install the camera and possibly break the mounting screw mount as seems to be an issue... So for a grand total of about $5 and ~20 mins work, I have a camera that should really never have to come out of the box unless I want to use it for something else."I may be a dirty pirate hooker...but I'm not about to go stand on the corner." iluvtofly DPH -7, TDS 578, Muff 5153, SCR 14890 I'm an asshole, and I approve this message Quote Share this post Link to post Share on other sites
Shoot 0 #62 January 26, 2010 Nice! Can you post a picture of the inside of the box plz? Quote Share this post Link to post Share on other sites
theonlyski 8 #63 January 26, 2010 Sure... this what you're looking for?"I may be a dirty pirate hooker...but I'm not about to go stand on the corner." iluvtofly DPH -7, TDS 578, Muff 5153, SCR 14890 I'm an asshole, and I approve this message Quote Share this post Link to post Share on other sites
Shoot 0 #64 January 27, 2010 Yep, thanks! Does the rubber-like patch on the bottom of the cookie box come standard? Quote Share this post Link to post Share on other sites
theonlyski 8 #65 January 27, 2010 as far as i know, yes, its part of the mount for the camera"I may be a dirty pirate hooker...but I'm not about to go stand on the corner." iluvtofly DPH -7, TDS 578, Muff 5153, SCR 14890 I'm an asshole, and I approve this message Quote Share this post Link to post Share on other sites
sickfish46 0 #66 January 27, 2010 Hear is my 2k composites fuzion, they have made a small batch off them in carbon fibre it cost a bit more but I think it was worth it. I have the new 2KC stills bracket with the portrait adaptor plate and a cx105 box witch I forgot to get the box in a matt finish never mind, every thing is mounted using two Zkulls. I am having my Hypeye modified with a split in the cable so I can remove the camera box without having to unplug it from the camera. Quote Share this post Link to post Share on other sites
JarheadNYC 0 #67 January 29, 2010 Just finished the D/C power upgrade for my CX-100 now my Cookie Atomic is complete, for my trip to Florida. Unless I find some new great gadget or great lens. This was recommended by "theonlyski" it's a simple upgrade that enables you to keep your camera in the cookie enclosure and you never need to remove it to charge the battery. In addition I have the hypoxic debrief cable to export or view footage without removing the camera. The "theonlyski" also sent me the parts list and offered any assistance, even to build the enclosure. I told him he should patent the idea and $$$, but as usual all skydivers want to share our ideas for the love of the sport. Parts List - Size M Panel-mount Coaxial DC Power Jack Model: 274-1563 | Catalog #: 274-1563 $2.99 Size M Coaxial DC Power Plug (2-Pack) Model: 274-1569 | Catalog #: 274-1569 $2.99 Tools needed soldering iron, solder, flux, drill, dremel with grinding attachment, and some electrical tape. Wear a dust mask carbon fiber drilling & grinding is messy. Big thanks goes out to "theonlyski" member of our forum and keep up the good work. In addition I'd like to thank you for your service to our nation he will soon be deploying to Iraq once again, we all wish you "God Speed" in your mission and hope to see you in the sky soon. Blue Skies Brother! 87-91 USMC - Gulf War part 1 - VeteranLive every day as it was your last, one day you'll be right! Quote Share this post Link to post Share on other sites
theonlyski 8 #68 January 29, 2010 QuoteJust finished the D/C power upgrade for my CX-100 now my Cookie Atomic is complete, for my trip to Florida. Unless I find some new great gadget or great lens. This was recommended by "theonlyski" it's a simple upgrade that enables you to keep your camera in the cookie enclosure and you never need to remove it to charge the battery. In addition I have the hypoxic debrief cable to export or view footage without removing the camera. The "theonlyski" also sent me the parts list and offered any assistance, even to build the enclosure. I told him he should patent the idea and $$$, but as usual all skydivers want to share our ideas for the love of the sport. RADIO SHACK Parts List - Size M Panel-mount Coaxial DC Power Jack Model: 274-1563 | Catalog #: 274-1563 $2.99 Size M Coaxial DC Power Plug (2-Pack) Model: 274-1569 | Catalog #: 274-1569 $2.99 Tools needed soldering iron, solder, flux, drill, dremel with grinding attachment, and some electrical tape. Wear a dust mask carbon fiber drilling & grinding is messy. Big thanks goes out to "theonlyski" member of our forum and keep up the good work. In addition I'd like to thank you for your service to our nation he will soon be deploying to Iraq once again, we all wish you "God Speed" in your mission and hope to see you in the sky soon. Blue Skies Brother! 87-91 USMC - Gulf War part 1 - Veteran"I may be a dirty pirate hooker...but I'm not about to go stand on the corner." iluvtofly DPH -7, TDS 578, Muff 5153, SCR 14890 I'm an asshole, and I approve this message Quote Share this post Link to post Share on other sites
agk23 0 #69 January 29, 2010 QuoteI am having my Hypeye modified with a split in the cable so I can remove the camera box without having to unplug it from the camera. Folks, how are you doing this? I so far came up with idea of using phone 6 pin connectors and 6 pin modular inline coupler. The idea is split the cable into two, attach connedtors to both sides of the split (which is easy with crimping tool) and to have coupler glued in inside the box/cage. This way I would not need to mess with soldering iron and the whole thing can be done in 5 mins. Let me know if you see any issues with my set up, or if you have better ideas."Gravity is a habit that is hard to shake off" Terry Pratchett, "Small Gods" Quote Share this post Link to post Share on other sites
skyjumpenfool 2 #70 January 30, 2010 It's a work in progress, but here is the latest. I'm in the progress of molding the carbon fiber video cover which will open to allow Hype Eye and power hook up.Birdshit & Fools Productions "Son, only two things fall from the sky." Quote Share this post Link to post Share on other sites
MaD117 0 #71 January 31, 2010 Here is my Cookie helmet with flatlock and home-made box for the CX100. The box protects the CX100 with Raynox HD3030, I can use the big battery and the HYPEYE is inside the box with a cable for debriefing. I only have to take the cam out for changing the battery. With this system, When I take the box off, my helmet is clean, no unecessary cables. Quote Share this post Link to post Share on other sites
JarheadNYC 0 #72 January 31, 2010 Cookie Atomic with CX-100 side mount, Blue Skies!Live every day as it was your last, one day you'll be right! Quote Share this post Link to post Share on other sites
freefalljason 0 #73 January 31, 2010 How much did Cookie and Mike pay you for the advertising??!!Blue Skies, Jason Quote Share this post Link to post Share on other sites
betor3 0 #74 January 31, 2010 Hey guys... My new just finished cx-100 setup.. can't wait to jump it... - My old Bonehead Da Bomb (I love it!) - Exitcomposite box for the cx-100 - Hypeye D Pro - Hamma .45 with ring adapter (gotta check how it works with HD) cheers! bto Quote Share this post Link to post Share on other sites
sickfish46 0 #75 January 31, 2010 The hypeye cable is being modified by a friend I will post pictures when it is finished. Quote Share this post Link to post Share on other sites
