jwcotting 0 #1 October 1, 2009 I bought a Conceptus tongue switch for a canon as it was all I could find and want to use it on my Nikon D700 which has a 10 pin plug. Does anyone know of an adapter or how it can be modified, please? thanks, jwcotting Quote Share this post Link to post Share on other sites
wildcard451 0 #2 October 1, 2009 QuoteI bought a Conceptus tongue switch for a canon as it was all I could find and want to use it on my Nikon D700 which has a 10 pin plug. Does anyone know of an adapter or how it can be modified, please? thanks, jwcotting There are very clear instructions for modifying a Conceptus switch to a proprietary switch on conceptus' website. I just did it with the D90. Quote Share this post Link to post Share on other sites
dragon2 2 #3 October 1, 2009 You buy a nikon remote and use that plug + a bit of the wire. Either cut off the canon plug and connect the wires or (better option) leave the canon plug alone and connect the nikon plug to a female for the canon plug. That way you can always switch out the tongueswitch for another without having to bother about the plug. Or, easiest of all, contact Laszlo for a ready-made Nikon compatible pro-mouth switch ciel bleu, Saskia Quote Share this post Link to post Share on other sites
Laszloimage 0 #4 October 2, 2009 I build adapters. Please PM to me if you're interested. -Laszlo- Quote Share this post Link to post Share on other sites
shogo 0 #6 October 7, 2009 i just ordered a canon 3 pin version of this (10 bucks) and the 2.5mm-3.5mm conversion cable (2 bucks). Might wouk for you, too. http://www.bhphotovideo.com/c/product/615570-REG/Dot_Line_RS_RTC_N10_RTS_Replacement_Adapter_for.html# Quote Share this post Link to post Share on other sites
jwcotting 0 #7 October 8, 2009 many thanks, this looks like just what i need Quote Share this post Link to post Share on other sites
