jdfreefly 1 #1 November 19, 2009 Tried the search and I didn't see anyone else with this issue. Trying to setup a helmet with a flatlock and a CX100 in a cookie box. The hole for the camera screw that is in the aluminum plate inside the CX100 box does not line up with the slot for the camera screw on the plate from the flatlock. Anyone else have this issue or know how to solve it? Methane Freefly - got stink? Quote Share this post Link to post Share on other sites
chutingstar 1 #2 November 19, 2009 QuoteTried the search and I didn't see anyone else with this issue. Trying to setup a helmet with a flatlock and a CX100 in a cookie box. The hole for the camera screw that is in the aluminum plate inside the CX100 box does not line up with the slot for the camera screw on the plate from the flatlock. Anyone else have this issue or know how to solve it? You will need the Liquid Flatlock top plate made for the CX100, which has an extra hole drilled off to the side of the main slot. This hole is specifically for lining up the CX100 Blackbox on the Liquid Flatlock. Here are some photos of the alternate plates: http://www.chutingstargear.com/index.php?main_page=product_info&cPath=57_59&products_id=423 Alternatively, you could drill your own hole on the plate you have. MikeChutingStar.com Quote Share this post Link to post Share on other sites
