Good Stuff - Canopy Camera

[d123 1]

There's a sequence in Good Stuff from Joe Jennings where a guy is filmed by a camera placed in the canopy and the camera is faching down.

Does anybody knows how was that made with respect to openings and safety?

Lock, Dock and Two Smoking Barrelrolls!

[Pulse 0]

I can't say I know much about it but I remember reading about it when I first started jumping.

Jamie Paul was doing it and from what I recall he had some 'pulley' system where he raised the camera up towards the canopy after it was open.

In other words, the camera was not in the parachute on opening or anything. But again, I want to state that I'm not 100% sure on all of this. I'm just going on faint memory.

"Any language where the unassuming word fly signifies an annoying insect, a means of travel, and a critical part of a gentleman's apparel is clearly asking to be mangled."

[AdD 1]

You could probably sew in a gopro hd these days

Life is ez
On the dz
Every jumper's dream
3 rigs and an airstream

[KermieCorleone 0]

http://www.youtube.com/watch?v=t62sVHRJJaE

a friend, did it with an SD gopro ... chk out his comments

- Neil

Never make assumptions! That harmless rectangle could be two triangles having sex ...

[Zymurdoo 0]

Quote

I am feeling a little nauseated after that 37 seconds.

Blue Skies, Soft Docks and Happy Landings!
CWR #23
(It's called CRW, add an e if you like, but I ain't calling it CFS. FU FAI!)

[jamiepaul 0]

Jamie here ... Hope that you had some success in figuring it out. It's been about 14+ since I did this but remember it like yesterday. It was done with a pulley system that I attached to the A lines after deployment. I tried sewing a spy camera into the bottom skin like someone did on the link in this thread and got similar results. I put stills up there, 16mm movie and video. Too much detail to go into for a post, but the trick is to get the camera as stable as possible. I had a lot of ideas for this, including the pond swoop (which I didnt perform so well and lost a camera on that one ;) ). Lots of trial and error. I had pictorial in Parachutist years ago doing all sorts of stuff. Not sure if this helps, wish you luck. If you have a question let me know and i'll try to help.

[dqpacker 7]

yeah he hooked it up pretty quick. he's been talking about trying it again with a hd gopro and spending a little more time on the design. he also packed the camera in the canopy, he's jumping a comp velo 79. fucking kritter.

[PhreeZone 20]

I did this years ago with a bullet cam hooked up to a recording deck in a fanny pack. If you want to do it that way I found it got better results if you can secure it to the line instead of having it hag off the line. In the bullet cam I was able to attach it at 3 spots and put it at the backside of the line and the video only had minor shake to it.

Yesterday is history
And tomorrow is a mystery

Parachutemanuals.com

[jamiepaul 0]

I always thought the best idea was to have the camera packed with the canopy so that you wouldn't waste valuable time after deployment like you would with a pulley system. I would eat up 3K feet getting everything stowed. I would agree that the lines are the most stable and the smaller the canopy the more tension the lines would have and thus more stability for bracing for the camera. I used a 107 Stiletto. I was only using one of the cascades as a stabilizing point for the pulley system, this gave it some rigidity. Although if I were to snap a turn the camera would go a bit crazy until it caught up with the canopy. Thanks to editing you don't see that part ;). My next design would have been to use the two inner A lines for stability trapping the pulley system in both cascades, then I believe the camera would be much more stable. Trial and error cost a lot of jumps on this project. I sometimes had four lines running up the cameras depending on what format I was using. There were always two pulley lines. 16mm movie film required power plus on/off wire. All the extra lines were threaded through spectra so as to appear to be a suspension line, and had to be taunt for the illusion. Now that video technology has caught up I can imagine using those two inner most cascades and midway down on them use spectra to make a trapese for the camera to suspend from. Pack the camera with the canopy and go.

[d123 1]

Thanks Jamie and keep up the good work!

Lock, Dock and Two Smoking Barrelrolls!