kiwiscantfly 0 #1 February 11, 2013 Wondering if anyone has used the xshut for mounting still cameras. Also if anyone has installed them into a curved surface. Quote Share this post Link to post Share on other sites
Ralph_W 0 #2 February 11, 2013 I use the X-Shut top mounted to hold the Nikon D200 for tandem stills, however mounted in a Tonfly camera helmet with a flat surface. Works perfect for hundreds of jumps so far. Some friends have an X-Shut mounted in a Paratec Freezr full face helmet. They use only GoPros mounted on it but from the footage I have seen and from their comments, they are happy with it. RalphSilence is golden. www.bt-ag.ch Quote Share this post Link to post Share on other sites
Zlew 0 #3 February 12, 2013 I am using one for my still mount on my FTP. The front plate is almost flat, but has a slight curve. I have it flush mounted (with the integration kit). Only jumped it maybe 20 jumps with the setup, but so far so good. http://www.flickr.com/photos/zlew/8431039335/in/set-72157632651673165 Quote Share this post Link to post Share on other sites
Ralph_W 0 #4 February 12, 2013 Post your question in the German forum (Stammtisch) here at DZ.com. No problem if you do it in English. As the X-shut is made in Germany, it is widely spread there and you should get some first hand feedback. RalphSilence is golden. www.bt-ag.ch Quote Share this post Link to post Share on other sites
holie 0 #5 February 13, 2013 give it a try ;-) http://x-shut.com http://x-shut.com/index.php?menuid=21&reporeid=39# Due to this, a platform on the upper side of the helmet is not necessary. The „balance washer Basis“ is between the helmet and the „Basis“. Due to this, the „Basis“ can exactly be adjusted to the desired angle when mounted. [inline 13_8450.png] :-) Quote Share this post Link to post Share on other sites
