skydiverton2 0 #51 June 22, 2013 No issues so far with the black during skydiving, snowboarding (including a big crash), bicycle, moterbike or at the front of my car upto 100km/hr.Using your droque to gain stability is a bad habid. . . Also in case you jump a sport rig!!! Quote Share this post Link to post Share on other sites
verdi 2 #52 June 22, 2013 danielcroftMine turned off randomly in freefall the other day. Battery backpack, 64GB card and latest firmware. *sigh* same problem here. only with the backpack attached. without the pack it works Quote Share this post Link to post Share on other sites
danielcroft 2 #53 July 31, 2013 I've found that if you have "too many"* files on the card, the camera will only record about 20 seconds before it just stops. That's even with 40GB of free space and full battery. * I have no idea what "too many" means but after emptying the card, everything was fine. Quote Share this post Link to post Share on other sites
skydiverton2 0 #54 August 5, 2013 danielcroftI've found that if you have "too many"* files on the card, the camera will only record about 20 seconds before it just stops. That's even with 40GB of free space and full battery. * I have no idea what "too many" means but after emptying the card, everything was fine. Empty by formatting!!!!!!, not just delete the files.Using your droque to gain stability is a bad habid. . . Also in case you jump a sport rig!!! Quote Share this post Link to post Share on other sites
PhreeZone 20 #55 August 5, 2013 After the newest Firmware update I tried to clear my card using the in camera option to Delete all - it locked the camera up at that point and i had to remove the battery 5 minutes later to get it exit finally. Not all the bugs are fixed it seems...Yesterday is history And tomorrow is a mystery Parachutemanuals.com Quote Share this post Link to post Share on other sites
Hellis 0 #56 August 5, 2013 skydiverton2***I've found that if you have "too many"* files on the card, the camera will only record about 20 seconds before it just stops. That's even with 40GB of free space and full battery. * I have no idea what "too many" means but after emptying the card, everything was fine. Empty by formatting!!!!!!, not just delete the files. I never do that, and I don't think you should have to. Make a firmware that works. Thats it. I have never formated my cards for my DSLR, and they are about 7 years old, and I have never had any problems. I have even had other files on the card (zip, doc etc.) while using the camera. Also, on my GoPro I have a file that removes all the thm and lrv files on the card. Makes it so much easier to copy it to the computer. If I would format I would lose this file every time. Quote Share this post Link to post Share on other sites
skydiveoc 0 #57 August 7, 2013 Can you share what this "file" is? Having the same issues with a Hero 2 recently switched to a class 10 card and firmware update. Lots of blank files and re-arranging files making it a nightmare for the editor once there are 6 or 7 tandems on it. Quote Share this post Link to post Share on other sites
Hellis 0 #58 August 7, 2013 Sure. Code: Quote del *.LRV del *.THM I attached the bat file as a zip. Unzip it and place it in your GOPRO-folder, when you open it the file will delete all files that is LRV or THM files. (leaving you with JPEG and MP4) Quote Share this post Link to post Share on other sites