airdrop 18 #1 December 2, 2015 Anyone know if a cx 110 with the SD card access located on the bottom next to battery will mount to a liquid flatlock and still have access to the SD slot without removing the camera from the mount? Quote Share this post Link to post Share on other sites
jumpsalot-2 3 #2 December 3, 2015 I don't know what your mount looks like but, my cx 110 is mounted on a Goldmember. I had the same problem of course. I slid my cam back on the plate until I could open the flap. Then marked the spot where the cx screw hole was, and drilled a new counter sunk hole in the plate. Works just fine.Life is short ... jump often. Quote Share this post Link to post Share on other sites
airdrop 18 #3 December 3, 2015 That is a good idea. I just bought a zkulls 3n attachment system and I'm not sure about drilling a 2 in hole in my helmet. Plus it costed me 130 bucks so only paying 90 for a gold member would be lot better! Quote Share this post Link to post Share on other sites
Zlew 0 #4 December 4, 2015 I use 150's with the flatlock. I have them both in bonehead boxes, and it makes it easy to get to the bottom of the camera quickly and easily without having to remove the flatlock. Quote Share this post Link to post Share on other sites
